NEWS

How can an evaporative heat exchanger improve the transfer rate?

Time：

2023-06-25 15:23

Evaporative heat exchanger can provide us with warmth because the heat of water is transferred to the air through the radiator, achieving the desired temperature at room temperature. How is the evaporative heat exchanger delivered? How can we improve the delivery rate?

1. Total expanded heat dissipation area

Water has a much higher density than air, and its thermal conductivity is much higher than that of gas. It is important to increase the surface area of a pipeline for evaporative heat exchangers in China.

2. Reduce touch thermal resistance

To reduce contact thermal resistance, it is highly challenging to handle the board. The height of industrial production plastic film should not exceed 15mm, and it should be 20mm in the room. Due to the high contact stress, the thermal resistance during contact is not only small, but also stable for a long time.

3. How can we improve the heat transfer efficiency in the tube by evaporating the heat of the water inside the heat exchanger so that we can develop reasonable information content and send it to the inner cavity of the tube? At first, the tube was not suitable for large flow, followed by the flow field in the converter layer, and once again, the increase in inner wall thickness area.

4. Improve the design scheme of the heat convection heat dissipation housing: select energy-saving heat dissipation components.

Only by paying sufficient attention to this element can our radiator meet the energy consumption level requirements. Therefore, after understanding the thermal knowledge of evaporative heat exchangers, you will also make appropriate choices.